I have been using Proxmox VE with Docker running on the host not managed by Proxmox, and then Cockpit to manage NFS Shares with Home Assistant OS running in a VM. It’s been pretty rock solid. That was until I updated to Version 9 last night, it’s been a nightmare getting the docker socket to be available. I think Debian Trixie may have some sort of extra layers of protection, I haven’t investigated it too much, but my plan tomorrow and this week is to migrate everything to Debian 12 as that’s the tried and true OS for me and I know it’s quite stable with Cockpit, docker and so forth with KVM for my Home Assistant installation.

One other OS for consideration if you are wanting to check it out is XCP-NG which I played with and Home Assistant with that was blazing fast, but they don’t allow NFS shares to be created and using existing data on my drives was not possible, so I would’ve had to format them .

Cloudflare tunnels support higher port numbers. I’ve done it in the past with Portainer. Also Proxmox which listens on 8006. Portainer on 9443.

Are there any plans to make a Flatpak version of this? I’ve moved to an immutable OS and none of the options you have will install. Flatpaks are their preferred method. I know I could self host my own version which may be what I may end up doing anyway, but I’d prefer to have it more local yet another docker container. :)

Edit: I just went with the Appimage which works.

If your router supports Freshtomato firmware, it also has adguard you can enable too.

Like others have said Arch is not as intimidating as it would appear to be. Over the last couple of years, they improved IHMO the most difficult process for the average user of installing Arch. You now just run archinstall Then follow the system prompts. It’s constantly being improved. If you do go with Arch, aside from using Pacman to install apps, you can use “Yay” or “Paru” or others which pull from the vast AUR repository.

I used Arch for a few years and recently moved over to Aurora Linux (Immutable KDE distro adapted from Fedora’s CoreOS and uBlueOS which is an offshoot of CoreOS) Specifically, I use the Developer experience of Aurora which gives you a VSCode type of editor as well as Podman desktop included as well as other items. It’s meant for those who wish to develop and not have to worry about keeping the system up to date. It runs updates in the background and rebooting your system will run the updates.

The reason I left Arch was simple, I used to like to live on the edge of software as well, until it took one too many hastily released updates which borked my Arch system. My home PC has morphed from being my dedicated computer to my wife’s and my computer which is fine, but I’d like to keep it available for her avoiding the need to do a repair because an update broke it.

Keep an eye out for the KDE Linux OS which they have in development and not yet for use, but is earmarked for being the official immutable OS for KDE which will receive their bleeding edge updates. https://linuxiac.com/kde-announced-its-kde-linux-distro/ https://community.kde.org/KDE_Linux

I plan on migrating to that once it’s finished. :) I’ve become a fan of immutable OS’s because they allow you to roll back if something should go wrong. Which it rarely does :)

You could always use ntfy.sh if you are wanting to keep it light weight, I know there seems to be a heavy following and happy community with it. I personally use Gotify which has been nice and easy to use and just works for my needs. :) I looked at the shoutrrr repo and it seems to be either abandoned or just no longer updating maybe because their is no need to in the Dev’s eyes. They also develop Watchtower which hasn’t been touched in about 2 years ago. I have never had any issues with Watchtower so I think it may not need much maintenance. I do see though that they are working on a new project: https://github.com/containrrr/shepherd but it’s also a bit stale.

To make it seamless so you can still Thunderbird, someone made a Docker image of it here: https://hub.docker.com/r/kebles/wanderbird But, you can probably find a newer release somewhere newer than 4 yrs old like this one. :) The point is, if you are wanting to keep it in the Thunderbird umbrella, then it’s most likely been Dockerized.

I’ve Tried Cypht recently, but if you are using Gmail, it has a conflict there so it won’t work out of the box without some extra work I think.

I can see them doing that, I use a DNS ad-block (Adguardhome) with plenty of filters and last night, I spotted that they were able to inject two ads (standard one to the right of the channels and one at the bottom below the menu for the new Minecraft movie when they changed my background. So, they are finding ways around this stuff. I simply disabled the Sponsored themes. We are on the fence about replacing the TV later this year but not 100% sure just yet. It’s been quite buggy randomly rebooting when switching sources and other things.

Not related to the server, but I was very happily surprised with the latest Roku Jellyfin channel. A complete refresh of everything and it’s great to see it.

Thanks for sharing this! I used it today to resize my Very large phone selfie I had to do for a profile image update at work and it did very nicely! Much faster for me to do that then load it in Gimp and scale it down since I was running late for work. : )

I discovered about a few months ago that XCP-NG does not support NFS shares which was a huge dealbreaker for me. Additionally, my notes from my last test indicated that I could not mount existing drives without erasing them. I’m aware that I could have spun up a TrueNAS or other file sharing server to bypass this, but maybe not if the system won’t mount the drives in the first place so it can pass them to the TrueNAS . I also had issues with their xen-orchestra which I will talk about below shortly. They also at the time, used an out of date CentOS build which unless I’m missing something, is no longer supported under that branding.

For the one test I did which was for a KVM setup, was my Home Assistant installation, I have that running in Proxmox and ccomparativelyit did seem to run faster than my Proxmox instance does. But that may be attributed to Home Assistant being the sole KVM on the system and no other services running (Aside from XCP-NG’s).

Their Xen-Orchestra for me was a bit frustrating to install as well, and being locked behind a 14 day trial for some of the services was a drawback for me. They are working on the front end gui to negate the need for this I believe, but the last time I tried to get things to work, it didn’t let me access it.

Let me preface this with that I am an experienced CLI user and with Docker, so this really is not in my interest generally, but getting older and dealing with a variety of other personal issues, having a nice dashboard to deploy things sometimes is just really nice ya know? So I figured I would put on my dusty beginner’s hat to get this a run.

For the beginner, it’s a nice system to get started and get your feet wet with a no-nonsense app install experience. I tested this in a VM on my desktop and installed Sonarr and Sabnzbd which if you use Docker with these, you know the proper volume mapping is key. They take the hassle out of doing this for the end user. With that said though - file permissions are a bit off and both Sonarr and Sabnzbd needed the proper permissions set for the folders. Not a deal breaker for someone accustomed to the CLI, but for a new self hoster, this can be a bit frustrating.

Their app store is pretty impressive and I guess growing, the install on the server was painless to get running. It’s something to keep an eye on, it’s in good company with the other ones like Umbel and CasaOS, each has their own qualities.

For those wanting more fine grained control over the apps and installs, Tipi is a bit more opinionated to the port numbers and paths used and you can’t easily modify those (at least from what I could tell). In the long run, this is a non issue for the most part if you are starting on a freshly installed server and don’t want to handle the challenges of proper path mapping, reverse proxying and so forth. (They include Traefik in the install). Not having to worry if port 3000 is already taken or 8080 is, you can trust that it will handle it and it does!