I’m looking at some CWWK, topton, and oaknode boards online for an upcoming build. I’m throwing proxmox and OPNsense on this. There’s a ryzen 8845HS board I’m curious about but there’s also some intel boards I could drop an i5-14600T used CPU into that could work well too. Either way I would have an intel ARC GPU in the PCI slot for media decode/encode and a coral TPU in the E-key M2 slot for frigate object recognition.

But I get conflicting info online about these boards being a waste of time and money. I see things about them burning out, or having weird BIOS bugs that never get fixed. On the other hand, NAScompares seems to like these boards. Are these something I should avoid?

  • muusemuuse@sh.itjust.worksOP
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    1
    ·
    edit-2
    18 hours ago

    Incorrect. The built in quicksync is adequate for a limited number of simultaneous streams. Considering I plan for frigate to handle multiple cameras on this machine I will need more streams.

    • non_burglar@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      16 hours ago

      You are mistaken. Frigate ingests rtsp and direct streams using HLS, which only accepts h264 or h265. The vast majority of cameras encode in h264. H264 is a trivial decode operation on modern hardware within the last decade.

      I am currently looking at CPU usage in my frigate container with 5 1080p RTSP streams and it is hovering at between 4% and 8%. Without any quicksync configured, just CPU and coral.

      I don’t know what your deal is, or why you think you know more than folks who have been doing this for years, but stop, please. You don’t know what you’re talking about.

      • muusemuuse@sh.itjust.worksOP
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        1
        ·
        edit-2
        16 hours ago

        They used to encode with h264. I set up a rig 2 years ago with the goal for using that but just couldn’t source cameras at a decent price that use the olde codec. It’s actually pretty difficult to find that anymore. Also, they need to decode streams for processing for things like object detection. That doesn’t work without decoding being done on each stream first.

        I am open to being wrong on this I just want to be certain before I get to the spending money stage. Can you show me where you got that information?

        • non_burglar@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 hour ago

          I checked the specs on 5 modern, newly released IP cameras. They all use h264/h265, aka AVC1 and HVEC. Not surprising, cause that’s part of the spec.

        • non_burglar@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          11 hours ago

          I’m angrily going to go look because you’ve introduced doubt in my mind. And I don’t like not knowing.