Did I just brick my SAS drive?
I was trying to make a pool with the other 5 drives and this one kept giving errors. As a completer beginner I turned to gpt…
What can I do? Is that drive bricked for good?
Don’t clown on me, I understand my mistake in running shell scripts from Ai…
Edit: EMPTY DRIVES NO DATA
The initial error was:
Edit: sde and SDA are the same drive, name just changed for some reason And also I know it was 100% my fault and preventable 😞
BIG EDIT:
For people that can help (btw, thx a lot), some more relevant info:
Exact drive model: SEAGATE ST4000NM0023 XMGG
HBA model and firmware: lspci | grep -i raid 00:17.0 RAID bus controller: Intel Corporation SATA Controller [RAID mode] Its an LSI card Bought it here
Kernel version / distro: I was using Truenas when I formatted it. Now trouble shooting on other PC got (6.8.0-38-generic), Linux Mint 22
Whether the controller supports DIF/DIX (T10 PI): output of lspci -vv
Whether other identical drives still work in the same slot/cable: yes all the other 5 drives worked when i set up a RAIDZ2 and a couple of them are exact same model of HDD
COMMANDS This is what I got for each command: verbatim output from
Thank you for helping! Like I said I’m a complete beginner with little knowledge of all this, means a lot 🤗
just so you know I connected the drive to my dell pc, so its just the one broken drive not all 6.
Exact drive model: SEAGATE ST4000NM0023 XMGG
HBA model and firmware: lspci | grep -i raid 00:17.0 RAID bus controller: Intel Corporation SATA Controller [RAID mode] Its an LSI card Bought it here
Kernel version / distro: I was using Truenas when I formatted it. Now trouble shooting on other PC got (6.8.0-38-generic), Linux Mint 22
Whether the controller supports DIF/DIX (T10 PI): output of lspci -vv
Whether other identical drives still work in the same slot/cable: yes all the other 5 drives worked when i set up a RAIDZ2 and a couple of them are exact same model of HDD
COMMANDS This is what I got for each command: verbatim output from
I really appreciate your knowledge and help 🙂
Let me know if anything else is needed